CZ Scorpion Pistol to SBR

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

CZ Scorpion Pistol to SBR

Postby Scott B. » Sun Mar 19, 2017 10:45 am

I've previously posted about my CZ Scorpion EVO 3 S1 Carbine (http://www.texaschlforum.com/viewtopic.php?f=87&t=84560). This post will be about the pistol version and its journey to becoming an SBR (Short Barreled Rifle).

Here's what you start out with, a 9mm pistol:

Image

To convert to an SBR, you'll need to pay $200 and submit your Form 1 paperwork. In about 8 ~ 12 months (these days) you'll get the tax stamp back and permission to make your pistol into an SBR. But wait, that's not all you have to do.

922r compliance.

There are officially 16 parts in the Scorpion pistol. The pistol is made in the Czech republic. 922r is a rule relating to a fun law (27 CFR 478.39) regarding the manufacture of a rifle from a list of 10 foreign made parts if the end result is a 'non-sporting' rifle.

CZ sells a 922r compliance kit. It consists of the following US made parts: 2- Mag bases 2- Mag followers 1- Disconnector 1- Trigger 1- Pistol Grip 1- Compensator. 8 parts replaced of the 16.

Replace those parts and you're in compliance with 922r. I am unaware of any enforcement of 922r at the individual consumer level, but comply with it we must.

For me to make an SBR I go a little different route. I have a type 07 FFL and an 02 SOT (special occupational tax). To make an SBR I simply file a Form 2 notification to ATF and appropriately engrave the item with company name and location.

Then I comply with 922r and slap a stock on the pistol. Here it is with US parts taken from my carbine and made 922 compliant:

Image

First major upgrade I did was change out the handguard. I dislike the stock one because it has the cheese graters (rails) molded right into the piece. The replacement is from HB Industries, is US made aluminum, has mlock slots and deletes the CZ barrel nut. You can also toss the irritating little ambidextrous sling eyelets that tend to rattle.

There is one minor flaw with this handguard. It's aluminum as stated, but so to is the nice replacement charging handle. Aluminum on aluminum moving parts is not so great. HB actually suggests that you run the stock charging handle as it's part polymer. Something to tackle down the road.

As it's going to be when I shoot a carbine match later today:

Image

Next change will be an Apex pistol grip that's a more vertical style that I hope will be a little more comfortable. The stock CZ grip isn't bad, but does get a little slick in the south Texas heat.

I've got a Gemtech GM-9 suppressor coming that's going to complete the SBR, for now. I am going to have the barrel shortened about a 1/4 inch and re-threaded to 1/2-28. It currently sports 1/2-28 threads, but they sit right in front of M18-1 metric threads from the old barrel nut. The 1/2-28 threads also look really short to me and I'm not 100% certain the suppressor will fully seat.

More pictures as things change. Questions? Fire away.
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Mon Mar 20, 2017 6:01 pm

Some of the Scorpion barrel nuts can be real challenges to get off. Using a barrel nut tool, offset wrench, I was easily able to clear the handguard and turn the nut.

Luckily there were only 2 or 3 threads w/ locktite on them. Cleaned right up with steel brush.

Image

Those are the 1/2-28 threads front, and the M18-1 threads of the barrel nut behind. I'm going to have that trimmed up and rethreaded.

Did try a new pistol grip, but didn't work for me. Made by Apex. It's a fine pistol grip, but once you shoulder the gun, the angle turns uncomfortable. This surprised me because I like my AR pistol grips to be more vertical than the A2 style. Switched back to the CZ grip. It's not aesthetically pleasing to me, and gets real slick in the summer, but I can work on that last bit with some skater tape.

This image shows the angle change of the Apex grip (on top):

Image

I'm fighting a powerful urge to paint this thing Coyote Brown (I have too many black guns as it is).
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT


SigM4
Senior Member
Posts: 446
Joined: Tue Jun 12, 2007 11:14 am
Location: Burleson

Re: CZ Scorpion Pistol to SBR

Postby SigM4 » Tue Mar 21, 2017 4:35 pm

Very nice. I'm waiting on my Form 1 filed back in early July to convert my carbine to an SBR. I have a HBI handguard like yours (though flat not slanted front) and a Yeti Werks grip (way more comfortable than the CZ grip). I'm planning on having a pistol barrel cut down to about 4.5" and threaded 1/2x28 for a three lug adaptor next time we're down in DFW (Class 3 Machining. I'd love to have the three lug machined right into the barrel, but not quite enough OD to do it. This should tuck my Octane or Obsidian neatly under the handguard. I'll post pics when its complete, shouldn't be too long before I have the stamp in hand.

Also, did you see where Prepper Gun Shop has the Manticore designed 32-round smoke mags with the metal feed lips in-stock? I've got a couple of these headed my way as we speak.
Success always occurs in private, and failure in full view.

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Tue Mar 21, 2017 9:10 pm

You must be climbing the walls with that stamp being so close to being issued.

Ordered a couple of mags as well. Just got my shipping notice from Prepper.

Which Yeti grip did you go with? I've looked at the Switchback with some interest.

I'm torn about having the barrel cut down any more, but I do like the idea of tucking the suppressor under the handguard. With the HB handguard mounting system, it's not like I couldn't pull it off if had trouble getting the suppressor off for cleaning.

What I'd really like to know is at what length accuracy starts to open up?
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT


SigM4
Senior Member
Posts: 446
Joined: Tue Jun 12, 2007 11:14 am
Location: Burleson

Re: CZ Scorpion Pistol to SBR

Postby SigM4 » Wed Mar 22, 2017 6:21 am

I opted for the Switchback because I wasn't sure which profile I wanted. Turns out I like the "no bump" backstrap.

HBI has tested and guarantees functionality down to 5.5" to match up with their K handguards. Several folks over on CZ forum have gone down to 4.5" without issue. As to the accuracy I'm interested as well, at least out to ~50 yards or so. Beyond that as long as I can hit a man-sized target at 100 yards or so that's fine with me.

I have numerous other SBRs (a 12.5" .308 being my newest) to play with for now, but yes, I can't want to have a 9mm to add into the mix.
Success always occurs in private, and failure in full view.

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Wed Mar 22, 2017 9:16 am

If the Switchbacks come back in stock, I'm going to grab one.

12.5" 308 sounds pretty interesting!

I've got a 11.5 and a 7.5, both 556. Thought briefly about an SBS can't find any real reason I need one. However, I am giving serious consideration to a K version MPX SBR that's been flirting w/ me. Perhaps an end-of-year bonus ;-)
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Wed Mar 22, 2017 4:11 pm

Took the Scorpion apart today so I could have the barrel sent out and rethreaded. Not much to it really. I would caution anyone taking theirs apart, the rear stock/button is under spring tension and will want to fly. Be gentle when prying the two flats apart and off the barrel trunnion. I could see somebody getting too aggressive there and regretting it.

Image

Old handguard pictured top for reference.
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT


rm9792
Senior Member
Posts: 2142
Joined: Sun Jun 03, 2007 9:07 pm

Re: CZ Scorpion Pistol to SBR

Postby rm9792 » Mon Mar 27, 2017 1:56 pm

I was under the impression that going NFA negated the 922r crap. When I researched threading a Beretta CX4 thats what I was told by the beretta forum.


dragun
Member
Posts: 61
Joined: Sun Feb 21, 2016 6:42 pm

Re: CZ Scorpion Pistol to SBR

Postby dragun » Tue Mar 28, 2017 7:58 pm

I really love your set up. It drives me crazy that we have to jump through those stupid hoops in order to have "comply" with moronic government regulations. :banghead:

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Tue Mar 28, 2017 9:34 pm

rm9792 wrote:I was under the impression that going NFA negated the 922r crap. When I researched threading a Beretta CX4 thats what I was told by the beretta forum.


Yeah, that's wrong. Unless you're talking MGs, different animal there. An SBR is still a rifle and manufacturers must comply, including individuals.
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT

User avatar

Topic author
Scott B.
Senior Member
Posts: 748
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: CZ Scorpion Pistol to SBR

Postby Scott B. » Fri Apr 28, 2017 1:31 pm

Finished product.

Unsuppressed - has a little 2 3/4" comp just to get the muzzle blast past the handguard.

Image

Suppressed - GM-9 direct thread

Image

...and just because I was taking photos. An SBR I'd recently reconfigured more to my liking.

Image
LTC Instructor. NRA - Instructor, RSO, Life Member. Sig armorer for classic pistols/320/M400/AR/MCX. FFL 07/02 SOT


SigM4
Senior Member
Posts: 446
Joined: Tue Jun 12, 2007 11:14 am
Location: Burleson

Re: CZ Scorpion Pistol to SBR

Postby SigM4 » Fri Apr 28, 2017 8:21 pm

Scott B. wrote:
...and just because I was taking photos. An SBR I'd recently reconfigured more to my liking.

Image


Ha, I love it. I SBR'd one of those Aero Texas lowers too, just felt right.

I like the Scorpion as well. I had a pistol barrel cut down to the HBI Micro/k configuration length, and paired it up with a new trunion. Now I just need to have the extractor notch machined into the trunion/barrel. Once that's done I should have a nice short package. Can't wait.
Success always occurs in private, and failure in full view.


Return to “General Gun, Shooting & Equipment Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest