Old and new deer feeders
Moderator: carlson1
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 7644
- Joined: Thu Jul 23, 2009 2:23 pm
- Location: Near San Jacinto
Old and new deer feeders
While we were up filling feeders I found one that was used back in the 1960's. Hand made by one of the original hunters long since passed away. Simple and worked. Nowadays it's a 55 gallon drum with a motorized slinger. Funny, but they are both called automatic, except one of them needs some help in order to feed the deer "automatically"
KAHR PM40/Hoffner IWB and S&W Mod 60/ Galco IWB
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
-
- Senior Member
- Posts in topic: 1
- Posts: 17350
- Joined: Tue Jul 03, 2007 12:53 pm
- Location: Houston
Re: Old and new deer feeders
Automatic, except the older one has no moving parts.puma guy wrote:While we were up filling feeders I found one that was used back in the 1960's. Hand made by one of the original hunters long since passed away. Simple and worked. Nowadays it's a 55 gallon drum with a motorized slinger. Funny, but they are both called automatic, except one of them needs some help in order to feed the deer "automatically"
The guy is the first picture looks like he could be your twin.
NRA Endowment Member
-
- Senior Member
- Posts in topic: 3
- Posts: 1265
- Joined: Wed Aug 31, 2011 7:29 pm
- Location: San Antonio, Texas
Re: Old and new deer feeders
I like to make feeders out of 6" pvc by drilling holes in them. The holes gotta be about 9/16" or 5/8" so the corn comes out slowly only when the feeder is tampered with. Two holes for bolting a small chain to hang from a tree. The pvc makes alot of noise when a buck uses his antlers to try and shake out corn. I glue the bottom end cap and leave the top one free. I also paint the green.
Cheap and easy to make. Its also fun to watch the deer use them.
Cheap and easy to make. Its also fun to watch the deer use them.
“Be ashamed to die until you have won some victory for humanity.”
― Horace Mann
― Horace Mann
Re: Old and new deer feeders
Unless you have cows on the property. Then you need a hog panel perimeter around anything you use or it WILL be empty in a week.
-
- Senior Member
- Posts in topic: 1
- Posts: 7863
- Joined: Fri Apr 01, 2005 9:16 am
- Location: Richmond, Texas
Re: Old and new deer feeders
If you really want to see an obsessed deer trying to get at something do the same to a 2 liter soda bottle. They will look like a bunch of soccer players kicking and beating the bottle to get the corn.Javier730 wrote:I like to make feeders out of 6" pvc by drilling holes in them. The holes gotta be about 9/16" or 5/8" so the corn comes out slowly only when the feeder is tampered with. Two holes for bolting a small chain to hang from a tree. The pvc makes alot of noise when a buck uses his antlers to try and shake out corn. I glue the bottom end cap and leave the top one free. I also paint the green.
Cheap and easy to make. Its also fun to watch the deer use them.
Another trick to distract them is to take a food block, drill holes in it just a tad bigger than mint candy canes. Stuff the holes with the candy canes way deep. Deer love candy.I gutted a buck once and you could see pieces of the red and white canes in his stomach.
"When democracy turns to tyranny, the armed citizen still gets to vote." Mike Vanderboegh
"The Smallest Minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." – Ayn Rand
"The Smallest Minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." – Ayn Rand
-
- Senior Member
- Posts in topic: 3
- Posts: 1265
- Joined: Wed Aug 31, 2011 7:29 pm
- Location: San Antonio, Texas
Re: Old and new deer feeders
I feed for the hogs as well. I love to watch them. There is a potbelly that has been bred by the feral hogs out here and her offspring are a bit tame or just tolerate me I guess.mcneyens wrote:Unless you have cows on the property. Then you need a hog panel perimeter around anything you use or it WILL be empty in a week.
“Be ashamed to die until you have won some victory for humanity.”
― Horace Mann
― Horace Mann
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 7644
- Joined: Thu Jul 23, 2009 2:23 pm
- Location: Near San Jacinto
Re: Old and new deer feeders
You noticed that. Yes we were womb mates! I booted him out (I was breech) and then stayed as long as I could because I knew that was the last time I'd have a room to myself. I could only hold out 15 minutes, so he's my older brother by a quarter hour.WildBill wrote:Automatic, except the older one has no moving parts.puma guy wrote:While we were up filling feeders I found one that was used back in the 1960's. Hand made by one of the original hunters long since passed away. Simple and worked. Nowadays it's a 55 gallon drum with a motorized slinger. Funny, but they are both called automatic, except one of them needs some help in order to feed the deer "automatically"
The guy is the first picture looks like he could be your twin.
KAHR PM40/Hoffner IWB and S&W Mod 60/ Galco IWB
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 7644
- Joined: Thu Jul 23, 2009 2:23 pm
- Location: Near San Jacinto
Re: Old and new deer feeders
It would be nice to be able to use gravity feeders like the ones you make and the old one here, but we have cattle on the lease and they'd make short order of anything at deer level. We have one guy left who has been on the lease since 1962 though he was teenager back then. His father, mother and uncles (one uncle made the old 5 gallon feeder) were all members. The owners have promised never to lease to anyone else as a result of the hunters being good stewards of their land.Javier730 wrote:I like to make feeders out of 6" pvc by drilling holes in them. The holes gotta be about 9/16" or 5/8" so the corn comes out slowly only when the feeder is tampered with. Two holes for bolting a small chain to hang from a tree. The pvc makes alot of noise when a buck uses his antlers to try and shake out corn. I glue the bottom end cap and leave the top one free. I also paint the green.
Cheap and easy to make. Its also fun to watch the deer use them.
KAHR PM40/Hoffner IWB and S&W Mod 60/ Galco IWB
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 7644
- Joined: Thu Jul 23, 2009 2:23 pm
- Location: Near San Jacinto
Re: Old and new deer feeders
Yep! The ground is too rocky to be able to put up fencing around the feeder so we have to use tripods with motorized slingers. The deer have to compete with the cows, but such is life. We've even had a couple of tripods knocked down by the cattle. We dog have hogs YET, but they're getting closer and closer.Javier730 wrote:I feed for the hogs as well. I love to watch them. There is a potbelly that has been bred by the feral hogs out here and her offspring are a bit tame or just tolerate me I guess.mcneyens wrote:Unless you have cows on the property. Then you need a hog panel perimeter around anything you use or it WILL be empty in a week.
KAHR PM40/Hoffner IWB and S&W Mod 60/ Galco IWB
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
NRA Endowment Member, TSRA Life Member,100 Club Life Member,TFC Member
My Faith, My Gun and My Constitution: I cling to all three!
-
- Senior Member
- Posts in topic: 3
- Posts: 1265
- Joined: Wed Aug 31, 2011 7:29 pm
- Location: San Antonio, Texas
Re: Old and new deer feeders
Here is one of the prototypes.
“Be ashamed to die until you have won some victory for humanity.”
― Horace Mann
― Horace Mann