And since it was already spray painted, I figured I should throw it onto a cheap old PSA build and try my hand at a rattle can paint job since I've never done one.
Degreased and taped off the muzzle and optic.
![Image](https://i.imgur.com/9h9d2xI.jpg)
Went with the only three colors of flat krylon Lowes carries in my area: tan, green, dark brown
![Image](https://i.imgur.com/RXD3E4r.jpg)
Used light tan for the base coat (easier to put dark on light than the other way around for later coats).
![Image](https://i.imgur.com/P1gyvHT.jpg)
Grabbed some handy weeds from the backyard.
![Image](https://i.imgur.com/dHLiyMZ.jpg)
Green for the second layer, sprayed over the weeds.
![Image](https://i.imgur.com/gSZLZ3u.jpg)
Dark brown for the third layer with weeds held at a different angle.
![Image](https://i.imgur.com/BVE80Wi.jpg)
Final product on green grass in the shade:
![Image](https://i.imgur.com/VhxgdFU.jpg)
And in brown grass in direct sunlight:
![Image](https://i.imgur.com/3vHRQDg.jpg)
Before and after:
![Image](https://i.imgur.com/D1AcTMz.jpg)
Pretty easy project, glad I picked up a used rail that encouraged me to just try it myself.