TexasCHLforum.com

Has any found a good source of brass and bullets

Looking for load data 375 Raptor

Has anyone found load data for the 277 fury

Has any one played with Molly coated lead bullets 1, does it work 2, any fouling problems with the barrel IE build up in the MICRO pours in the lands and groves
I am looking at subsonic projectiles 300 AAC and 350 Legion

Does anyone know if Promo is a flake ,ball ,spherical powder

It has not been on the market for years but WW 630 is great for hot loads I was getting 1200 FPS 150 gr cast out of a 38 SP 6 inch not sure what part of the world you are in but there is a show in Pasadena this weekend one of the vendors should have SPM primer

Have you changed anything in your lower IE hammer spring or Triger a lot of 3.5LB triggers will not set off a hard primers

What do you mean by caps can you find the part on Dillon's web site and a different name of the part

That can be hard to do as i understand the powder is not standard canister as we buy off the shelf the manufacture blends one lot of powder with the last lot to help maintain consistency for civilian use, the military loads are not by weight but by pressure and velocity the powder is not blended i d...

The least experience and simplest way i found to lube cases is a mix 99% rubbing alcohol with landline in solution, wet an old pillow case with it add your brass, mix it up and down pour out the brass the alcohol will flash off and your cases are lubed with no lube in the case mouth any were from 50...

back in the 1970s it was the only way to get brass other than new ammo

any easier way is to use a table saw with a fine tooth carbide tooth blade and a rip fence , you would need to make a clam shell stile jig out of wood it will hold 10-15 pieces of brass in the same way we all made 300 Blackout brass out of 5.56 brass you can ruff trim 75-100 + pieces an hour then yo...

Has any one converted 308 LC Brass in to 6.5 Creedmoor if so did you has to turn the case neck and how did it shoot thanks

Has any one played with 30 caliber sabots? I did with 300 AAC Black Out. I got a 60gr. V Max up to 2800 fps gave up not enough velocity or energy down range no benefits to the round, I tried 6 different powders. Then switched to 308 Win I got a 60 gr V Max up to 3800 fps" 6-8 inch group at 100 ...

I had a Ponsness Warren Auto Drive for Dillon 1050 used mostly for sizing ,trimming ,swaging primer pockets on bottle neck cases all at onces about 700 rds per hr but constant I think they are around $950.00 they sell 2 speeds 700 and 900 rds per hr