2022 assault Weapons Ban

This forum is for general legislative discussions not specific to any given legislative session. It will remain open.

Moderator: carlson1

User avatar

The Annoyed Man
Senior Member
Posts in topic: 3
Posts: 26480
Joined: Wed Jan 16, 2008 12:59 pm
Location: North Richland Hills, Texas
Contact:

Re: 2022 assault Weapons Ban

#31

Post by The Annoyed Man »

Rafe wrote: Wed Aug 03, 2022 11:14 am
The Annoyed Man wrote: Tue Aug 02, 2022 10:50 pm FWIW, I’m not "transferring" any of mine…not in this climate. I foresee some tragic boating accidents.

Oh, and we’re looking at buying an old but good condition Bridgeport mill, so we can "make stuff" if we want to.
Even used, a Bridgeport can set you back a penny or two. And they're pretty big. Sigh. I'm not the handiest guy on the block, but if I had it to do all over again I'd, 1) be wealthy; 2) buy and build on a nice chunk of property in the Hill Country; and 3) as a hobby, set up my own metal working shop with all...well, many of the bells and whistles. I also can't gunsmith my way out of a Brownell's catalog, but it would sure be fun to have all the tools and learn to actually build components...especially considering parameter number one that I'd be wealthy and not have to work for a living. ;-)

But I'm not transferring anything either. And I'm even a bit poorer now. The ease and speed with which such an abominable and clearly anti-Constitutional bill swept through the House was just another reminder that complacency is not a strategic plan. So I've ordered a few more odds and ends.
My son is a CNC machine programmer and a very experienced machinist. The Bridgeport in question is an old machine his employer had laying around in the back of their factory, no longer in use. It runs. We’re essentially acquiring it for the price of its value in scrap metal. We have a pretty decent sized little shop in the back of our garage, and it will fit perfectly in one of the back corners of that shop. We’ll have to relocate a big air compressor, but otherwise it shouldn’t be a problem.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

― G. Michael Hopf, "Those Who Remain"
User avatar

PUCKER
Senior Member
Posts in topic: 1
Posts: 1548
Joined: Wed Jan 30, 2008 4:05 pm
Location: Grapevine, TX

Re: 2022 assault Weapons Ban

#32

Post by PUCKER »

The Annoyed Man wrote: Thu Aug 04, 2022 8:48 am
Rafe wrote: Wed Aug 03, 2022 11:14 am
The Annoyed Man wrote: Tue Aug 02, 2022 10:50 pm FWIW, I’m not "transferring" any of mine…not in this climate. I foresee some tragic boating accidents.

Oh, and we’re looking at buying an old but good condition Bridgeport mill, so we can "make stuff" if we want to.
Even used, a Bridgeport can set you back a penny or two. And they're pretty big. Sigh. I'm not the handiest guy on the block, but if I had it to do all over again I'd, 1) be wealthy; 2) buy and build on a nice chunk of property in the Hill Country; and 3) as a hobby, set up my own metal working shop with all...well, many of the bells and whistles. I also can't gunsmith my way out of a Brownell's catalog, but it would sure be fun to have all the tools and learn to actually build components...especially considering parameter number one that I'd be wealthy and not have to work for a living. ;-)

But I'm not transferring anything either. And I'm even a bit poorer now. The ease and speed with which such an abominable and clearly anti-Constitutional bill swept through the House was just another reminder that complacency is not a strategic plan. So I've ordered a few more odds and ends.
My son is a CNC machine programmer and a very experienced machinist. The Bridgeport in question is an old machine his employer had laying around in the back of their factory, no longer in use. It runs. We’re essentially acquiring it for the price of its value in scrap metal. We have a pretty decent sized little shop in the back of our garage, and it will fit perfectly in one of the back corners of that shop. We’ll have to relocate a big air compressor, but otherwise it shouldn’t be a problem.
It's AMAZING how many Bridgeports are still out there...even with the advent of 5-axis CNC it seems that almost every shop I visit has an old Bridgeport Mill (or similar) and a Hardinge Tool Room Lathe. BTW - shameless plug for one of my advertisers (I'm a 3rd gen manufacturing technology magazine editor/publisher): you can buy replacement heads (see the Mill Replacement Head ad on our Business Card Ads, left page), add-on DROs, etc. for the Bridgeports...
https://www.virtualonlineeditions.com/p ... ssueViewer
User avatar

OldCurlyWolf
Senior Member
Posts in topic: 1
Posts: 1294
Joined: Sat Sep 18, 2010 3:00 am

Re: 2022 assault Weapons Ban

#33

Post by OldCurlyWolf »

Tex1961 wrote: Fri Jul 29, 2022 1:37 pm Totally unconstitutional, and good luck turning millions of American citizens into felons and good luck getting us to give them up.
I wish them the WORST POSSIBLE LUCK in this endeavor. :evil2: :evil2: :evil2: :evil2:
I won't be wronged, I won't be insulted, and I won't be laid a hand on.
I don't do those things to other people and I require the same of them.

Don’t pick a fight with an old man. If he is too old to fight, he’ll just kill you.
User avatar

Rafe
Senior Member
Posts in topic: 9
Posts: 1423
Joined: Fri Mar 23, 2018 7:43 pm
Location: Htown

Re: 2022 assault Weapons Ban

#34

Post by Rafe »

This is over 2 weeks old, but I just ran into it on YouTube. A reminder that David Cicilline (D-DE) is the author of HR 1808 and here, in a 4-minute microcosm, is a prefect example of anti-gun politicians having no earthly clue about even the basic anatomy of firearms. This is about as bad as the infamous display from Carolyn McCarthy (former D-NY) who thought a barrel shroud was the "shoulder thing that goes up." :banghead:

Last edited by Rafe on Tue Aug 16, 2022 5:43 pm, edited 1 time in total.
“Be ready; now is the beginning of happenings.”
― Robert E. Howard, Swords of Shahrazar
User avatar

Paladin
Senior Member
Posts in topic: 2
Posts: 5234
Joined: Thu Dec 23, 2004 4:02 pm
Location: DFW

Re: 2022 assault Weapons Ban

#35

Post by Paladin »

Rafe wrote: Tue Aug 16, 2022 3:20 pm This is over 2 weeks old, but I just ran into it on YouTube. A reminder that David Cicilline (D-DE) is the author of HR 1808 and here, in a 4-minute microcosm, is a prefect example of anti-gun politicians having no earthly clue about even the basic anatomy of firearms. This is about as bad as the infamous display from Carolyn McCarthy (former D-NY) who though a barrel shroud was the "shoulder thing that goes up." :banghead:

Classic! :cheers2:
JOIN NRA TODAY!
NRA Benefactor Life, TSRA Defender Life, Gun Owners of America Life, VCDL Member
LTC Instructor, NRA Certified Instructor, CRSO
User avatar

Rafe
Senior Member
Posts in topic: 9
Posts: 1423
Joined: Fri Mar 23, 2018 7:43 pm
Location: Htown

Re: 2022 assault Weapons Ban

#36

Post by Rafe »

Paladin wrote: Tue Aug 16, 2022 3:42 pm
Rafe wrote: Tue Aug 16, 2022 3:20 pm This is over 2 weeks old, but I just ran into it on YouTube. A reminder that David Cicilline (D-DE) is the author of HR 1808 and here, in a 4-minute microcosm, is a prefect example of anti-gun politicians having no earthly clue about even the basic anatomy of firearms. This is about as bad as the infamous display from Carolyn McCarthy (former D-NY) who thought a barrel shroud was the "shoulder thing that goes up." :banghead:
Classic! :cheers2:
I immediately looked at my AR pistol, confirmed it had a stabilizer brace, and thought: "Oh, wow! Have I owned a fully automatic weapon all these years and never known?! How come I've never been able to make it go full-auto at the range?" :shock:
:biggrinjester:
“Be ready; now is the beginning of happenings.”
― Robert E. Howard, Swords of Shahrazar
Post Reply

Return to “General Legislative Discussions”