TulAmmo .357 158gr FMJ Steel Case

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply
User avatar

Topic author
jmorris
Senior Member
Posts in topic: 1
Posts: 1531
Joined: Sat Mar 08, 2008 4:41 pm
Location: La Vernia
Contact:

TulAmmo .357 158gr FMJ Steel Case

#1

Post by jmorris »

Anybody shooting this ammo? Went to the range today with my Rossi 971, which I've never had a problem with. Fired maybe 30 rounds of .38 then loaded up these rounds. Pulled the trigger, bang. Tried to pull the trigger and couldn't. Cylinder wouldn't turn. Couldn't get the cylinder out at first, then could hardly get the casing out. Revolver was fully functional so tried another round, same thing.

It appears that when fired as the case pushes back against the frame the case also swells so much that it jams in the cylinder.

Anyone else have any experience with this ammo?
Jay E Morris,
Guardian Firearm Training, NRA Pistol, LTC < retired from all
NRA Lifetime, TSRA Lifetime
NRA Recruiter (link)
User avatar

Oldgringo
Senior Member
Posts in topic: 1
Posts: 11203
Joined: Sat Mar 08, 2008 10:15 pm
Location: Pineywoods of east Texas

Re: TulAmmo .357 158gr FMJ Steel Case

#2

Post by Oldgringo »

TulAmmo are cheap steel case Russian cartridges that I've been shooting in my AR's (.223) with no problems....so far. Anybody else?
Last edited by Oldgringo on Sat May 13, 2017 10:04 am, edited 1 time in total.

stash
Senior Member
Posts in topic: 1
Posts: 850
Joined: Wed Jun 07, 2006 9:04 am
Location: Woodcreek

Re: TulAmmo .357 158gr FMJ Steel Case

#3

Post by stash »

I don't know if this has anything to do with the problem but I have been told you should clean the cylinder holes out after shooting.38 and before shooting .357 mags.
TSRA
NRA
TFC
USMC 1961-1966
User avatar

The Annoyed Man
Senior Member
Posts in topic: 1
Posts: 26796
Joined: Wed Jan 16, 2008 12:59 pm
Location: North Richland Hills, Texas
Contact:

Re: TulAmmo .357 158gr FMJ Steel Case

#4

Post by The Annoyed Man »

I can't speak to their pistol ammo, but in response to Oldgringo:
Oldgringo wrote:TulAmmo are steel case Russian cartridges that I've been shooting in my AR's (.223) with no problems....so far. Anybody else?
Matter of time. Glad you're enjoying that new AR. If you can afford it, I'd buy bulk brass-cased remanufactured ammo. The prices are competitive, and you will avoid the problems that so many have reported with steel-cased Russian ammo.

BiteTheBullet.co: remanufactured, boxer-primed reloadable brass-cased, Hornady 55 grain copper-jacketed FMJ, $255.99/1000 rounds, 26¢/round. In my last shipment, almost all of the brass used was Lake City.

Russian Wolf Military Classic: berdan-primed polymer-coated NON-reloadable steel cased, 55 grain bimetal FMJ bullet (lead core, with a copper-plated steel jacket), $224.90/1000, 23¢/round. Here's what you get for your 3¢/cartridge savings: you can't reload it, the bullets will wear out your barrel faster, and the cases are more likely to get stuck in the chamber.

TulAmmo is available for 24¢/round, of similar construction to the Wolf Military Classic, having unreloadable berdan-primed steel-cases (with and without polymer coatings), and bimetal bullets. Like the Wolf ammo, the bullets will wear out your barrel faster, and the polymer coated versions are likely to get stuck in your chamber at some point.

FWIW, spend the extra 2¢-3¢ per round, and do your rifle a BIG favor. That's just my opinion, and YMMV.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

― G. Michael Hopf, "Those Who Remain"

#TINVOWOOT
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”