Are these the dies that I need for reloading 357 SIG?
The .357 Sig die set has the FL, Expander and Seater dies plus the shell holder and the allen wrench. $35.00 shipped for them
Daniel
357 SIG Dies - Redding
Moderators: carlson1, Charles L. Cotton
-
Topic author - Senior Member
- Posts in topic: 2
- Posts: 267
- Joined: Sat Jan 14, 2006 11:19 pm
- Location: Lufkin, Texas
-
Topic author - Senior Member
- Posts in topic: 2
- Posts: 267
- Joined: Sat Jan 14, 2006 11:19 pm
- Location: Lufkin, Texas
Re: 357 SIG Dies - Redding
If the seating die also crimps then you are all set. I use Lee dies and have included their crimping die to my set. With this cartridge doing the crimp separately from seating has worked out better for me.
Make certain that you check the case length and keep them trimmed well below max lengths. And if your Redding sizing die is steel, not carbide, then you will have to lube each case.
Good luck and let us know how your first session goes.
Kind Regards,
Tom
Make certain that you check the case length and keep them trimmed well below max lengths. And if your Redding sizing die is steel, not carbide, then you will have to lube each case.
Good luck and let us know how your first session goes.
Kind Regards,
Tom