TexasCHLforum.com

BAYONNE, NJ – January 21, 2020 – Henry is introducing a highly anticipated new product line today with the X Model series, a concept that was first teased at the 2018 NRA Annual Meetings & Exhibits in Dallas, TX. All the firearms included in this new product launch are designed from the ground up to bring unparalleled versatility and utility to not only Henry’s line of rifles and shotguns, but the lever action platform in general. All five models are now available nationwide from licensed firearms dealers with an MSRP across the board of $970.00.

Anthony Imperato, President and owner of Henry Repeating Arms says, “The sheer volume of positive feedback we received about the concept guns we brought to Dallas was incredible, and this type of strong feedback is what tends to drive our product development plans.” Imperato continues, “It’s exciting to kick off the year with such a highly requested line of firearms and finally make these guns a reality.”

The X Model series consists of the Big Boy platform, chambered in .44 Mag/.44 Spl, .357 Mag./.38 Spl, and .45 Colt, a lever action .410 shotgun, and another rifle chambered in .45-70 Government. All five models sport durable and lightweight synthetic furniture with a solid rubber recoil pad on the pistol-gripped buttstock, Picatinny and M-Lok accessory slots on the forestock, and integrated sling swivel studs. The matte blued steel receivers utilize a side loading gate to keep the removable tube magazine loaded and they are all drilled and tapped to accept an optics mount. The rifles are all threaded at the muzzle end with a 5/8×24 thread pitch to accommodate a suppressor or other muzzle device. The shotgun’s smooth bore barrel is threaded internally for a removable invector style choke and contrasting fiber optic sights adorn all of the X Models with the .410 shotgun variation using only a front sight.

n5wmk wrote: ↑Thu Jan 23, 2020 9:22 am Dang, one of those in .357/38 Spl is sure tempting!

SigM4 wrote: ↑Sun Jan 26, 2020 7:42 pm

n5wmk wrote: ↑Thu Jan 23, 2020 9:22 am Dang, one of those in .357/38 Spl is sure tempting!

Same. If/when they offer one with wood vs. the plastic stock and forend I’m in for one in .357/.38 to throw a suppressor on.

C-dub wrote: ↑Sun Jan 26, 2020 8:09 pm

SigM4 wrote: ↑Sun Jan 26, 2020 7:42 pm

n5wmk wrote: ↑Thu Jan 23, 2020 9:22 am Dang, one of those in .357/38 Spl is sure tempting!

Same. If/when they offer one with wood vs. the plastic stock and forend I’m in for one in .357/.38 to throw a suppressor on.

They do have a few, just without the side loading gate.

SigM4 wrote: ↑Sun Jan 26, 2020 10:50 pm

C-dub wrote: ↑Sun Jan 26, 2020 8:09 pm

SigM4 wrote: ↑Sun Jan 26, 2020 7:42 pm

n5wmk wrote: ↑Thu Jan 23, 2020 9:22 am Dang, one of those in .357/38 Spl is sure tempting!

Same. If/when they offer one with wood vs. the plastic stock and forend I’m in for one in .357/.38 to throw a suppressor on.

They do have a few, just without the side loading gate.

That’s the problem though, you really need the side loading gate, otherwise you’re removing the suppressor each time you load it.

Jago668 wrote: ↑Tue Jan 28, 2020 2:48 pm I also wonder how hard it would be to put a picatinny rail on the top of the receiver. Wouldn't mind tossing an aimpoint micro on one for a brush gun.

Jago668 wrote: ↑Tue Jan 28, 2020 2:48 pm I also wonder how hard it would be to put a picatinny rail on the top of the receiver. Wouldn't mind tossing an aimpoint micro on one for a brush gun.

The Annoyed Man wrote: ↑Tue Jan 28, 2020 5:26 pm

Jago668 wrote: ↑Tue Jan 28, 2020 2:48 pm I also wonder how hard it would be to put a picatinny rail on the top of the receiver. Wouldn't mind tossing an aimpoint micro on one for a brush gun.

XS Sight Systems makes a rail for Marlins. I have one on my 336BL. I’d be surprised if they weren’t working on one to fit Henrys.