TexasCHLforum.com

What else do I need?

gas tube
http://www.bravocompanyusa.com/Gas-Tube-s/45.htm" onclick="window.open(this.href);return false;

Spike lower
http://www.aimsurplus.com/product.aspx? ... groupid=53" onclick="window.open(this.href);return false;

Spike bolt
http://www.aimsurplus.com/product.aspx? ... groupid=55" onclick="window.open(this.href);return false;

Spike upper
http://www.aimsurplus.com/product.aspx? ... groupid=55" onclick="window.open(this.href);return false;

MOE Mid-lenght
http://store.magpul.com/product/MAG418/184" onclick="window.open(this.href);return false;

DD barel
http://www.midwayusa.com/product/461614 ... te-pre-ban" onclick="window.open(this.href);return false;

Del-ton lpk
http://www.midwayusa.com/product/333717 ... -kit-ar-15" onclick="window.open(this.href);return false;

DPMS gas block
http://www.midwayusa.com/product/793138 ... inum-matte" onclick="window.open(this.href);return false;

Troy rear sight
http://www.cheaperthandirt.com/2TRYSSIGDOARFFT00-1.html" onclick="window.open(this.href);return false;

Troy front sight
http://www.cheaperthandirt.com/2TRYFBSFM4FDE-1.html" onclick="window.open(this.href);return false;

Magpul angled grip
http://www.cheaperthandirt.com/ARR859-1.html" onclick="window.open(this.href);return false;

DD 6-piston kit
http://www.deserttactical.com/Daniel_De ... poskit.htm" onclick="window.open(this.href);return false;

Buttstock
http://www.brownells.com/.aspx/pid=2670 ... -BUTTSTOCK" onclick="window.open(this.href);return false;

BCM charge handle
http://www.bravocompanyusa.com/BCM-GUNF ... %20556.htm" onclick="window.open(this.href);return false;

So how does this look?

The total was $1032.29

I'm not a fan of Del-ton...

Why not just buy a Spike's rifle?

I'm new to the whole AR-15 build thing too and hopefully will be building my first soon. So I really appreciate you starting this post (and your others) as they have been very informative.

Looking at your new list, If you are going with those hand guards and gas block, you'll probably need a different barrel. The one you have now is carbine length...you would need a barrel with mid-length gas port cut. Or you could change the rail and gas block (low profile) and keep the gas system carbine if that’s what you want. I have decided to go with the ML barrel option because of what I've read here and elsewhere about the gas systems. Below are examples of the two barrels I will probably get.

http://www.spikestactical.com/new/z/st- ... p-830.html" onclick="window.open(this.href);return false;
or
http://palmettostatearmory.com/index.ph ... arrel.html" onclick="window.open(this.href);return false;

Hope this helps from one noob to another If I'm wrong, hopefully someone will correct me soon.

Jusster

Thanks for the response..Since mt total isnt too much i'll change the barrel. I've been super eager to build my AR for months. I went to ar15buider.com and got the major grasp from there.

And the spiker barrel only shoots 5.56? right? Which ammo cal is the more expensive in the long run? .223 or 5.56.

x007x wrote:And the spiker barrel only shoots 5.56? right? Which ammo cal is the more expensive in the long run? .223 or 5.56.

It's a lit like .357/.38

A 5.56 will shoot either, a .223 barrel may choke on 5.56 stuff.

Okay, so 5.56 can shoot .223, but a .223 barrel doesn't shoot 5.56 well.
well thanks for all the tips

You can shoot .223 thru a 5.56 barrel….just not supposed to do it the other way around. The 556 barrel just gives you the option to shoot both.

Jusster

Also, if my AR build is good. i'll start buying pieces soon. I think i have evything needed.

If you are going to go Magpul MOE, I would skip the Del-Ton ($60), the DD tube kit ($55), the Brownelles MOE stock ($60) and just go with THIS. You will save at least $40. Palmetto has pretty much all of the parts you are looking for at one place so you can also save by not having to pay shipping to 10 different sites.

Thank you very much..Saves about $30. Is there any part that i need to build my Ar?

Carlson has the SITES you are looking at in black for sale for a good price.

Thank You

I'd consider this lower as well:

http://newfrontierarmory.com/catalog/in ... s_id=34089" onclick="window.open(this.href);return false;