Where to begin with a HAM radio?

Topics that do not fit anywhere else. Absolutely NO discussions of religion, race, or immigration!

Moderators: Charles L. Cotton, carlson1

User avatar

TexasJohnBoy
Banned
Posts in topic: 13
Posts: 1999
Joined: Sun Mar 22, 2015 4:21 pm
Location: North Texas

Re: Where to begin with a HAM radio?

#31

Post by TexasJohnBoy » Sat Jun 03, 2017 4:19 pm

2farnorth wrote:The Baofeng radios are just ok. Not great. Their receivers are like barn doors and will be interfered with by any strong signal nearby. Mine is sensitive to my wifi signals on certain frequencies. To properly program them you need a Baofeng cable to attach the to your computer. Be aware that there are some low quality fake/clones on the market. The radios can be programmed manually but it's an onerous process. The programming disk that came with my cable was totally useless. Would do nothing but flash "Baofeng" intermittently. I downloaded the "chirp" (http://chirp.danplanet.com) program and after I found the proper installer.exe file I was able to complete the programming. Now the radio hears all the repeaters within a reasonable distance but accessing them with the tiny antenna and low power is hit and miss. An optional antenna is recommended.
Thanks for the feedback. I'm looking for something that is a bit on the affordable side to start with, so I think it's a compromise I can live with. I had read the same thing about the antennas also.
TSRA Member since 5/30/15; NRA Member since 10/31/14

User avatar

cheezit
Senior Member
Posts in topic: 6
Posts: 1101
Joined: Tue Jun 22, 2010 9:10 pm
Location: far n fortworh

Re: Where to begin with a HAM radio?

#32

Post by cheezit » Sat Jun 03, 2017 7:06 pm

http://aa9pw.com

I got more from here then most other places and it's free.

User avatar

cheezit
Senior Member
Posts in topic: 6
Posts: 1101
Joined: Tue Jun 22, 2010 9:10 pm
Location: far n fortworh

Re: Where to begin with a HAM radio?

#33

Post by cheezit » Sat Jun 03, 2017 7:09 pm

There are also a number of easy to build 2m and 440 antennas that work well.
I use a home brew copper pipe 3dfl that works great. I also made a copper pipe loop that is just as good.

User avatar

Scott B.
Senior Member
Posts in topic: 7
Posts: 1309
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: Where to begin with a HAM radio?

#34

Post by Scott B. » Sat Jun 03, 2017 7:55 pm

I'm waiting until I learn more before jumping into hardware. All suggestions for reasonably capable gear for the beginner greatly appreciated.
LTC / SSC Instructor. NRA - Instructor, CRSO, Life Member.
Sig pistol/rifle & Glock armorer | FFL 07/02 SOT

User avatar

Charles L. Cotton
Site Admin
Posts in topic: 15
Posts: 17518
Joined: Wed Dec 22, 2004 9:31 pm
Location: Friendswood, TX
Contact:

Re: Where to begin with a HAM radio?

#35

Post by Charles L. Cotton » Sat Jun 03, 2017 8:16 pm

cheezit wrote:There are also a number of easy to build 2m and 440 antennas that work well.
:iagree: It's very easy to build your own antenna for minimal cost. Probably the most common easily-built antenna is a quarter wave ground plane. Most folks new to ham radio start with a cheap dual band handheld radio (HT). They typically have both 2 meters and 70 cm (a/k/a 440MHz). If so, they you need to make a dual band antenna.

Chas.


DIY 2-meter ground plane antenna


DIY dual band (2 meter/70 cm) ground plane


DIY dual band OSJ antenna (built like a battleship!)


XDgal
Member
Posts in topic: 3
Posts: 107
Joined: Mon Oct 02, 2006 4:30 pm
Location: Dallas

Re: Where to begin with a HAM radio?

#36

Post by XDgal » Sat Jun 03, 2017 11:03 pm

I came across the first video by K7AGE about three weeks ago and built this easy antenna. It works great! I'm in the southern part of Dallas and worked the 146.94 repeater in Ft. Worth, about 35 to 40 miles away. Got a very good signal report. I'm using my Yaesu VX 170 HT. With Radio Shack closing most of their stores, parts are 70% off. I paid $1,50 for the SO 239 connector, and used some #12 Romex I had on hand. I also purchased a 20 foot RG 58 U cable with PL259 connectors on each end from Radio Shack, also 70% off, for $4. Give it a try! 73s! KE5KMS
XDgal

User avatar

cheezit
Senior Member
Posts in topic: 6
Posts: 1101
Joined: Tue Jun 22, 2010 9:10 pm
Location: far n fortworh

Re: Where to begin with a HAM radio?

#37

Post by cheezit » Sun Jun 04, 2017 9:49 am

Dave tadlock on you tube also has some great builds that are easy and pretty cheep to make.

User avatar

TexasJohnBoy
Banned
Posts in topic: 13
Posts: 1999
Joined: Sun Mar 22, 2015 4:21 pm
Location: North Texas

Re: Where to begin with a HAM radio?

#38

Post by TexasJohnBoy » Mon Jun 05, 2017 10:08 pm

I picked this up on Amazon, should be here Wednesday. The ARRL Ham Radio License Manual Spiral Bound https://www.amazon.com/dp/1625950470/

I'm going to go to an exam early next month, found here:
http://www.arrl.org/find-an-amateur-rad ... am-session

I think a full month of study should get me there without letting it get stale. Shooting for an hour of study a day on average.
TSRA Member since 5/30/15; NRA Member since 10/31/14

User avatar

cheezit
Senior Member
Posts in topic: 6
Posts: 1101
Joined: Tue Jun 22, 2010 9:10 pm
Location: far n fortworh

Re: Where to begin with a HAM radio?

#39

Post by cheezit » Tue Jun 06, 2017 4:58 pm

TexasJohnBoy wrote:I picked this up on Amazon, should be here Wednesday. The ARRL Ham Radio License Manual Spiral Bound https://www.amazon.com/dp/1625950470/

I'm going to go to an exam early next month, found here:
http://www.arrl.org/find-an-amateur-rad ... am-session

I think a full month of study should get me there without letting it get stale. Shooting for an hour of study a day on average.
You will still need to take both of the other tests.

User avatar

TexasJohnBoy
Banned
Posts in topic: 13
Posts: 1999
Joined: Sun Mar 22, 2015 4:21 pm
Location: North Texas

Re: Where to begin with a HAM radio?

#40

Post by TexasJohnBoy » Tue Jun 06, 2017 5:19 pm

cheezit wrote:
TexasJohnBoy wrote:I picked this up on Amazon, should be here Wednesday. The ARRL Ham Radio License Manual Spiral Bound https://www.amazon.com/dp/1625950470/

I'm going to go to an exam early next month, found here:
http://www.arrl.org/find-an-amateur-rad ... am-session

I think a full month of study should get me there without letting it get stale. Shooting for an hour of study a day on average.
You will still need to take both of the other tests.
If I want amateur extra, but if I'm just doing a technician license I only have to take the technician test. One test per level from what I understand.
TSRA Member since 5/30/15; NRA Member since 10/31/14


txyaloo
Member
Posts in topic: 2
Posts: 113
Joined: Thu Mar 17, 2011 5:38 pm

Re: Where to begin with a HAM radio?

#41

Post by txyaloo » Tue Jun 06, 2017 6:30 pm

I recently passed my technician exam and barely missed passing extra. I mainly used two sites and an android app for studying.

I found this one the best for my learning style: https://hamstudy.org/tech2014

Being able to track trends and identify areas where I needed to put in a little more work helped.

I also used: https://hamexam.org/flash_cards/12-Technician

I own a few Baofengs that I bought before getting licensed. They work fine. I also have a TYT MD-390 for DMR which I like a lot. Houston metro has great DMR coverage and promiscuous mode along with the DMR users list on the modified firmware is nice

User avatar

MustangGlocker
Member
Posts in topic: 6
Posts: 88
Joined: Fri Dec 08, 2006 5:19 pm
Location: Fort Worth
Contact:

Re: Where to begin with a HAM radio?

#42

Post by MustangGlocker » Tue Jun 06, 2017 7:02 pm

One big word of advice for anyone wanting to study and receive a license, make sure you are obtaining the current question pool. If you buy direct from W5YI or ARRL, you are getting the most current one. I know W5YI destroys outdated stuff when new pools come out. I assume ARRL does also. If you buy from a retailer or online(Amazon, Ebay, etc), triple check you are getting the current questions. There are some ham radio retailers that will sell outdated material.
Patrick
NRA Life Member
Blue Lives Matter

User avatar

Charles L. Cotton
Site Admin
Posts in topic: 15
Posts: 17518
Joined: Wed Dec 22, 2004 9:31 pm
Location: Friendswood, TX
Contact:

Re: Where to begin with a HAM radio?

#43

Post by Charles L. Cotton » Tue Jun 06, 2017 9:45 pm

MustangGlocker wrote:One big word of advice for anyone wanting to study and receive a license, make sure you are obtaining the current question pool. If you buy direct from W5YI or ARRL, you are getting the most current one. I know W5YI destroys outdated stuff when new pools come out. I assume ARRL does also. If you buy from a retailer or online(Amazon, Ebay, etc), triple check you are getting the current questions. There are some ham radio retailers that will sell outdated material.
This is very good advice. Also, the question pool for each of the three license classes (Technician, General & Extra) expire at different times.

Chas.

User avatar

TexasJohnBoy
Banned
Posts in topic: 13
Posts: 1999
Joined: Sun Mar 22, 2015 4:21 pm
Location: North Texas

Re: Where to begin with a HAM radio?

#44

Post by TexasJohnBoy » Tue Jun 06, 2017 10:41 pm

The book I ordered was advertised as the ARRL guide for the current technician (until 2018) pool of questions. I'll post if I don't get what was advertised from Amazon...
TSRA Member since 5/30/15; NRA Member since 10/31/14

User avatar

RoyGBiv
Senior Member
Posts in topic: 13
Posts: 7956
Joined: Wed Jan 05, 2011 11:41 am
Location: Fort Worth

Re: Where to begin with a HAM radio?

#45

Post by RoyGBiv » Wed Jun 07, 2017 8:17 am

TexasJohnBoy wrote:Y'all, I don't need another hobby. Quit it!
bblhd672 wrote:What would be good equipment to get started with? Preferably mobile (handheld) first, then base station (home).
But I have the same questions....
IMO Buying a Baofeng UV-5R for about $30 from Amazon is the easiest, no-regrets, starter handset.
Low investment and more than enough quality to get started.
My $150 Alinco handset is great, but the transmit and receive quality of the Baofeng is equal.
Baofeng battery life is MUCH better. The only spec where the Alinco beats the Baofeng is that the Alinco has some water resistance rating.

Make sure to buy from a reputable seller with fulfillment via Amazon. I got one with a defective connector and Amazon made it right, no questions asked.

Also, I highly recommend buying a data cable for programming from a computer. While I find the Baofeng easier to program from the keypad than my Alinco, it's still much MUCH easier to program from the computer. The programming software is free from either Baofeng or you can use CHIRP. I prefer CHIRP.
I am not a lawyer. This is NOT legal advice.!
Image
Nothing tempers idealism quite like the cold bath of reality.... SQLGeek

Post Reply

Return to “Off-Topic”