Win NT Brass small primer 45ACP
Moderators: carlson1, Charles L. Cotton
-
T.O.M.
- Junior Member
- Posts: 40
- Joined: Mon Aug 17, 2009 7:13 pm
Win NT Brass small primer 45ACP
Has any one worked up a load for 45ACP with the NT WIN brass . Is it reloadable ? It has a larger flash hole
-
BobCat
- Senior Member
- Posts: 911
- Joined: Wed Dec 29, 2004 3:33 pm
- Location: East Bernard, TX
Re: Win NT Brass small primer 45ACP
According to what I've read it is supposed to be reloadable - you might check with Winchester, they might go out on a limb and confirm that - but I just put them aside since there aren't many in what I pick up.
The ones with the smaller-diameter primer pocket are the real problem; I put them in with spent .22 and neck-cracked cases for remelt.
Regards,
Andrew
The ones with the smaller-diameter primer pocket are the real problem; I put them in with spent .22 and neck-cracked cases for remelt.
Regards,
Andrew
Retractable claws; the *original* concealed carry
-
philbo
- Banned
- Posts: 555
- Joined: Fri Apr 07, 2006 9:36 am
Re: Win NT Brass small primer 45ACP
It's reloadable. I separate them and when I have enough I load my normal practice round using 4.4 grains of Titegroup under a 230 grain FMJ or plated bullet. Great for range use when I don't intend to pick up the brass.T.O.M. wrote:Has any one worked up a load for 45ACP with the NT WIN brass . Is it reloadable ? It has a larger flash hole