.22 Double Action Revolvers Are SCARCE

[doc540]

I've been looking for a decent .22 double action revolver in the $300 price range to use in my training classes.

I don't need an heirloom K-22 with box and papers, just a .22 revolver with a good double action.

The new Taurus revolvers take both fingers on the trigger to get the hammer to move.

S&W's are $400+ and Colts are somewhere in orbit around Uranus.

ok, I'm done whining

[Carry-a-Kimber]

Charter Arms Pathfinder?

[Chemist45]

Ruger offers the SP1010 and the LCR in 22LR.
Both are DA revolvers.

[Carry-a-Kimber]

Ruger offers the SP1010 and the LCR in 22LR.
Both are DA revolvers.

And they are both well over $300.00

[doc540]

Ruger offers the SP1010 and the LCR in 22LR.
Both are DA revolvers.

Thanks, but not close to $300 these days, especially after shipping/transfer fees

I'm just whining and grousing cause I can't afford a Smith or a Colt.

[puma guy]

You might search for used Harrington Richardson or High Standard Sentinel at places like GunBroker.

[doc540]

You might search for used Harrington Richardson or Hi Standard Sentinel.

Truth be known, I have an old, family Sentinel, but after two trips to the gunsmith it's still light striking and I don't know how to fix it myself.

[puma guy]

You might search for used Harrington Richardson or Hi Standard Sentinel.

Truth be known, I have an old, family Sentinel, but after two trips to the gunsmith it's still light striking and I don't know how to fix it myself.

I can't remember what type hammer spring the Sentinels use - did the smith replace it?
Edit: Uses a coil spring. If the hammer is not binding and there are no problems with hammer parts or spring guide it may be the spring. Numrich has them for $3.85. My dad had a Sentinel made for JC Higgins and it was the first pistol I shot.
Here's a link

http://www.gunpartscorp.com/catalog/Pro ... catid=8478

[doc540]

You might search for used Harrington Richardson or Hi Standard Sentinel.

Truth be known, I have an old, family Sentinel, but after two trips to the gunsmith it's still light striking and I don't know how to fix it myself.

I can't remember what type hammer spring the Sentinels use - did the smith replace it?

I know it's a coil and the alloy frame design is a pain to work on.

I've given up on it.

[Carry-a-Kimber]

Rossi 511?

[doc540]

Rossi 511?

Thanks, but Rossi scares me, especially pushing $400.

My gunsmith has a bone to pick with them for reasons unknown to me.

[drjoker]

all modern double action revolvers are going to have stiff triggers to prevent lawsuits. have you tried single action revolvers?

[WildBill]

Ruger offers the SP1010 and the LCR in 22LR.
Both are DA revolvers.

Thanks, but not close to $300 these days, especially after shipping/transfer fees

I'm just whining and grousing cause I can't afford a Smith or a Colt.

I have a pair of these. One in .38Spl and one .22LR. I think my dad paid around $40 each for them. Collectors Firearms has a .22LR Officer's Model listed for $900.

I regret not buying a Colt Diamondback in .38Spl and .22LR when they were available new.

[WildBill]

all modern double action revolvers are going to have stiff triggers to prevent lawsuits. have you tried single action revolvers?

Stiff triggers on DA revolvers are due to poor design and workmanship rather than a fear of lawsuits.

[doc540]

Ruger offers the SP1010 and the LCR in 22LR.
Both are DA revolvers.

Thanks, but not close to $300 these days, especially after shipping/transfer fees

I'm just whining and grousing cause I can't afford a Smith or a Colt.

I have a pair of these. One in .38Spl and one .22LR. I think my dad paid around $40 each for them. Collectors Firearms has a .22LR Officer's Model listed for $900.

I regret not buying a Colt Diamondback in .38Spl and .22LR when they were available new.

Ohhh, gee thanks! Talk about rubbing salt on a wound!