My Beretta Nano doesn't like me.

martusmedia · Post by **martusmedia** » Wed Jul 11, 2012 12:28 pm

Ok, for those of you that saw me shooting (not hitting much) on the plates with my Nano, I am still have issues with my grip and trigger on it. But I had an issue that I wanted to share with y'all, and get an opinion on how I should approach this. If I drop from a very slight height so as to not damage my Nano on the side where the magazine release is, the mag ejects! You can see video here.

[youtube]http://www.youtube.com/watch?v=C4oz65D8 ... ature=plcp[/youtube]

Comments? Suggestions? Have sent it back to Beretta twice. No fixes each time.

RPB · Post by **RPB** » Wed Jul 11, 2012 12:54 pm

martusmedia wrote:Ok, for those of you that saw me shooting (not hitting much) on the plates with my Nano, I am still have issues with my grip and trigger on it. But I had an issue that I wanted to share with y'all, and get an opinion on how I should approach this. If I drop from a very slight height so as to not damage my Nano on the side where the magazine release is, the mag ejects! You can see video here.

[youtube]http://youtube.com/watch?v=C4oz65D8xec[/youtube]

Comments? Suggestions? Have sent it back to Beretta twice. No fixes each time.

www.
and
&list=UUZ7cGH6P6xBFGfkA8No9q9w&index=2&feature=plcp
aren't needed in the youtube link

AEA · Post by **AEA** » Wed Jul 11, 2012 1:49 pm

Get the Dremel Tool to work on that release button till it is just slightly protruding from the frame and below the level of the grips/slide.

martusmedia · Post by **martusmedia** » Wed Jul 11, 2012 1:56 pm

Almost afraid I don't trust it now. The fact that it does that just nags at me. Thanks for the tip about youtube - will watch that in future.

AEA · Post by **AEA** » Wed Jul 11, 2012 2:22 pm

Well, there is another option.......
Sell it and buy something that works.

RPB · Post by **RPB** » Wed Jul 11, 2012 4:10 pm

By the way martusmedia

WELCOME to the forum

Youtube embedding still sometimes tricks me.

Salty1 · Post by **Salty1** » Wed Jul 11, 2012 4:24 pm

Sounds like the guns mag release either sticks out a bit too far or the spring is very light, makes me wonder if your normal grip also releases the mag. What about when in a holster, will a small bump release the mag? I would be concerned about my standard grip releasing the mag much more then when putting it on a table, but thats me. I would give a gunsmith a call and ask them if they can tighten up the release a bit so it takes a bit more pressure to release it

TexasCHLforum.com

My Beretta Nano doesn't like me.

My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.

Re: My Beretta Nano doesn't like me.