Now that got me thinking about possibly going from 45 down to 9, in the same frame....... And after thinking about it a while (and knowing it isnt a simple barrel and mag swap, like 40 to 9) I was thinking that maybe one could switch the slide assemblies and insert a spacer into the mag well (or replacement spring, follower and spacer into an M&P45 mag to accommodate 9mm). Theories and input would be greatly appreciated
M&P9 slide on an M&P45....
Moderator: carlson1
M&P9 slide on an M&P45....
So, my wife and I decided that we wanted to sell our Sig P239s and replace them with M&P9s. Then the question arose about caliber conversions.....especially seeing as she would like to consolidate calibers, and liked the fact that the M&P45 gave us more rounds in about the same size package as a 1911.
Now that got me thinking about possibly going from 45 down to 9, in the same frame....... And after thinking about it a while (and knowing it isnt a simple barrel and mag swap, like 40 to 9) I was thinking that maybe one could switch the slide assemblies and insert a spacer into the mag well (or replacement spring, follower and spacer into an M&P45 mag to accommodate 9mm). Theories and input would be greatly appreciated
Now that got me thinking about possibly going from 45 down to 9, in the same frame....... And after thinking about it a while (and knowing it isnt a simple barrel and mag swap, like 40 to 9) I was thinking that maybe one could switch the slide assemblies and insert a spacer into the mag well (or replacement spring, follower and spacer into an M&P45 mag to accommodate 9mm). Theories and input would be greatly appreciated
This We'll Defend
- LAYGO
- Senior Member
- Posts: 632
- Joined: Fri Oct 01, 2010 2:18 pm
- Location: Cross Roads, TX (Denton Co)
Re: M&P9 slide on an M&P45....
There's probably too significant of differences to make it work reliably. I've got a 45 & 40 at home. I had never thought to try to swap slides, but I do have a 9 barrel/mag for my 40. That fires reliably! If the slide didn't say 40 on it, you'd never know. Wonder if someone does engraving to add a '9' to it! ;)
40/9
40&9
40-9
Hehehe, M&P 409. Like the cleaner. Gets it all done . . .
What's you're ultimate goal in this?
40/9
40&9
40-9
Hehehe, M&P 409. Like the cleaner. Gets it all done . . .
What's you're ultimate goal in this?
S&W M&P 40 Mid (EDC) - S&W Shields (his/hers) - S&W M&P .45C - S&W 4513TSW .45 (1st Gen, retired to nightstand)
CMMG AR15 w/ACOG
Anderson AR15 pistol w/Aimpoint H1
08/04/2013 CHL class taken - plastic rec'd 08/26! Renewed 2018
CMMG AR15 w/ACOG
Anderson AR15 pistol w/Aimpoint H1
08/04/2013 CHL class taken - plastic rec'd 08/26! Renewed 2018
Re: M&P9 slide on an M&P45....
The 45 is a larger frame size so it won't work. As mentioned above a 40 can accommodate the 9mm and the 357 SIG by simply swapping barrels. In reality, there is very little difference among the 9mm, 357 SIG, 40 S&W, and the .45 ACP for self defense. I own two 1911 pistols that rarely get carried I carry either an M&P 40 or a G19 and don't worry about the effectiveness of either caliber. 
"To disarm the people is the best and most effectual way to enslave them."
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
Re: M&P9 slide on an M&P45....
Thanks for the info. Thought experiments are always fun, and some tend to get expensive.....and I am sure that my wife appreciates the fact that now I don't have a "reason" to get both 
This We'll Defend
Re: M&P9 slide on an M&P45....
40 to 9... I would have thought you'd have to swap the recoil spring also.
I never let schooling interfere with my education. Mark Twain
Re: M&P9 slide on an M&P45....
The factory recoil spring is the same for all three calibers. That's what I run in all my M&Ps.Maxwell wrote:40 to 9... I would have thought you'd have to swap the recoil spring also.
"To disarm the people is the best and most effectual way to enslave them."
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
Re: M&P9 slide on an M&P45....
thanks MoJo! That's good news. Hmm... I wonder if that holds true for my PX4 also...
Happy Thanksgiving!
Happy Thanksgiving!
I never let schooling interfere with my education. Mark Twain