Sig Sauer P229 Equinox

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply
Animal Cop
Member
Posts: 102
Joined: Mon Aug 13, 2007 6:27 pm

Sig Sauer P229 Equinox

Post by Animal Cop »

I hope everyone had a great Christmas, I have a question, does anyone have the Sig Sauer P229 Equinox? Can you give me some feed back on it. Do you like it, how does it shoot, etc. Thanks in advance.
Animal Cop
NRA
TSRA
CHL Holder
Texas Armadillo
Member
Posts: 61
Joined: Thu Jun 21, 2007 7:25 am
Location: Katy, Texas

Re: Sig Sauer P229 Equinox

Post by Texas Armadillo »

I have a P226 Equinox and a P229 Two Tone in 40 S&W. The Equinox has the cool wood grips, nite sites, shaved slide sides. I love my P226 Equinox, it was my first SIG, It's very accurate. One of the first things I did though was to take off those cool grips and put Hogues on it. I didn't want to beat 'em up.

I didn't get the P229 in Equinox because it had a rail and I wanted to carry the P229 and I don't like rails on a carry gun. The P229 is not as accurate as the P226 but it's close. I've worn it a couple of times but I'm not a big guy and the P229 is just a tad heavy for me. So I end up carrying my P239/40 more often than anything. All my SIGS are utterly reliable and the mags are good quality. No complaint here.

Hope this helps.
Texas Armadillo
Member
Posts: 61
Joined: Thu Jun 21, 2007 7:25 am
Location: Katy, Texas

Re: Sig Sauer P229 Equinox

Post by Texas Armadillo »

Oh, if you do want a non-railed SIG, you can still get them from time to time. Steve at SCP firearms is pretty good at finding what you want.

http://www.scpfirearms.com/products.php?cat=firearms
User avatar
Dragonfighter
Senior Member
Posts: 2315
Joined: Tue Sep 04, 2007 2:02 pm
Contact:

Re: Sig Sauer P229 Equinox

Post by Dragonfighter »

Texas Armadillo wrote:Oh, if you do want a non-railed SIG, you can still get them from time to time. Steve at SCP firearms is pretty good at finding what you want.

http://www.scpfirearms.com/products.php?cat=firearms
What a cool page, whoever did his css sheet and html is very good. Oh yeah, the P229 looks very sexy. Can someone explain what is meant by "railed?"
I Thess 5:21
Disclaimer: IANAL, IANYL, IDNPOOTV, IDNSIAHIE and IANROFL
"There is no situation so bad that you can't make it worse." - Chris Hadfield, NASA ISS Astronaut
Texas Armadillo
Member
Posts: 61
Joined: Thu Jun 21, 2007 7:25 am
Location: Katy, Texas

Re: Sig Sauer P229 Equinox

Post by Texas Armadillo »

See the place under the barrel of an Equniox gun that holds the attachments (like a light)? Now look at Steves page and find the P239's. No place for a light to fit. Non-Rail = No Mounting rail.
SigM4
Senior Member
Posts: 861
Joined: Tue Jun 12, 2007 11:14 am
Location: Wichita, KS…for now (always a Texan)

Re: Sig Sauer P229 Equinox

Post by SigM4 »

+1 for Steve at SCP. You might also give member Zeroskill a shout, I know he got an assorted shipment from Sig of a lot of out-of-production non-railed Sigs. Very cool/lucky find for him.
Success always occurs in private, and failure in full view.
xrod69
Junior Member
Posts: 30
Joined: Mon Aug 13, 2007 5:44 pm

Re: Sig Sauer P229 Equinox

Post by xrod69 »

i have a 220 equinox great gun i like the 229 better though
ShilohShooters
Member
Posts: 53
Joined: Wed Oct 24, 2007 10:29 pm
Location: Houston

Re: Sig Sauer P229 Equinox

Post by ShilohShooters »

I got my 226 Equinox for Christmas and was thoroughly pleased as this has long been my dream gun. Then I took it to the range to celebrate the birth of our lord with a good old fashioned family shoot out. At 10 feet it is dead on. Anything past that and it is horribly low (6 - 12 inches on average). I know the old adage, "Its not the gun, its the shooter." So I take out the old reliable Glock 17 and center punch everything from 10 to 60 feet. Then take the Equinox back out and cant hit my targets if my life depended on it. Does anyone have any suggestions? I have run over 1000 rounds through it, so it is well into the break-in process. Also, it does not return to slide lock when the mag is empty. Anyone out there have the same problems or suggestions for me? I would love to be able to rely on this gun.
Target hangers are not targets.
fizteach
Member
Posts: 121
Joined: Thu Mar 15, 2007 6:22 pm
Location: Dallas

Re: Sig Sauer P229 Equinox

Post by fizteach »

Watch your thumb placement on the slide release. I found that on my P239, my thumb would touch the slide release, putting just enough pressure on the release to keep the slide from locking back.

Sigs are combat sighted, meaning that your sight picture should be higher than you would expect. Go to sigforum dot com and do a search as a member (Testpilot) just did a good write up on sighting Sigs.

Semper fi,

Bob
xrod69
Junior Member
Posts: 30
Joined: Mon Aug 13, 2007 5:44 pm

Re: Sig Sauer P229 Equinox

Post by xrod69 »

steve great person to deal with zeroskillz is good to :iagree: :iagree: :iagree:
ShilohShooters
Member
Posts: 53
Joined: Wed Oct 24, 2007 10:29 pm
Location: Houston

Re: Sig Sauer P229 Equinox

Post by ShilohShooters »

Thanks for the suggestions. Now hopefully I can shoot half as good as it looks!
Target hangers are not targets.
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”