Dry Firing
Moderator: carlson1
-
- Member
- Posts: 102
- Joined: Mon Aug 13, 2007 6:27 pm
Dry Firing
What do you use to dry fire your gun. Can anyone suggest a product.
Thanks,
Animal Cop
Thanks,
Animal Cop
NRA
TSRA
CHL Holder
TSRA
CHL Holder
Re: Dry Firing
Uh, I use my finger.Animal Cop wrote:What do you use to dry fire your gun. Can anyone suggest a product.
Thanks,
Animal Cop

If you feel the need, snap caps are cheap, but I have never felt the need to do so on most modern center fire guns.
Re: Dry Firing
I'm not sure exactly what you are after, but the dryfire kit from Firearms Safety Training is an excellent piece of kit. It's found here:Animal Cop wrote:What do you use to dry fire your gun. Can anyone suggest a product.
Thanks,
Animal Cop
http://www.firearms-safety.info/
“It is the belief that violence is an aberration that is dangerous because it lulls us into forgetting how easily violence may erupt in quiescent places.” S. Pinker
Re: Dry Firing
Animal Cop -
While they aren't necessary for dry firing most "modern" centerfire pistols this is what I use. You can get them at most gun stores, gun shows or Academy, etc.
http://www.midwayusa.com/ebrowse.exe/br ... 15***10558***
In addition to dry firing, I also think that they are good for training for newbies for learning how to load a magazine, rack the slide, etc.
While they aren't necessary for dry firing most "modern" centerfire pistols this is what I use. You can get them at most gun stores, gun shows or Academy, etc.
http://www.midwayusa.com/ebrowse.exe/br ... 15***10558***
In addition to dry firing, I also think that they are good for training for newbies for learning how to load a magazine, rack the slide, etc.
NRA Endowment Member
Re: Dry Firing
Berretta recommends that one doesn't dryfire the 92, I've used empty brass instead of snap caps.WildBill wrote:Animal Cop -
While they aren't necessary for dry firing most "modern" centerfire pistols this is what I use. You can get them at most gun stores, gun shows or Academy, etc.
http://www.midwayusa.com/ebrowse.exe/br ... 15***10558***
In addition to dry firing, I also think that they are good for training for newbies for learning how to load a magazine, rack the slide, etc.
Liberty''s Blog
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy
Re: Dry Firing
Wouldn't that be basically the same as firing with no snap caps? The indent in the primer is going to allow the firing pin to travel the full distance and slam forward. Snap caps have a resilient rubber piece where the primer would be. This prevents the firing pin from slamming forward at full speed, just as an unfired primer would do. I think that's the whole basis of using snap caps.Berretta recommends that one doesn't dryfire the 92, I've used empty brass instead of snap caps.
I believe there is safety in numbers..
numbers like: 9, .22, .38, .357, .45, .223, 5.56, 7.62, 6.5, .30-06...
numbers like: 9, .22, .38, .357, .45, .223, 5.56, 7.62, 6.5, .30-06...
-
- Banned
- Posts: 2173
- Joined: Sat Apr 07, 2007 1:24 pm
- Location: Smithville, TX
Re: Dry Firing
Snap caps are cheap. I've used a few different types. Dillon has some good ones for not much money. Plus, their catalogs are pretty cool too.
Treat your guns right and they will treat you right.

Treat your guns right and they will treat you right.
Ahm jus' a Southern boy trapped in a Yankee's body
Re: Dry Firing
Beretta sugested using the used brass in the manual. I don't dryfire much, and I figure they know what they are talking about.O6nop wrote:Wouldn't that be basically the same as firing with no snap caps? The indent in the primer is going to allow the firing pin to travel the full distance and slam forward. Snap caps have a resilient rubber piece where the primer would be. This prevents the firing pin from slamming forward at full speed, just as an unfired primer would do. I think that's the whole basis of using snap caps.Berretta recommends that one doesn't dryfire the 92, I've used empty brass instead of snap caps.
Liberty''s Blog
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy
Re: Dry Firing
Any good quality Snap-Cap; I have mostly A-Zoom and Pachmayr, but the 12-gauge are Omniplast. I have Snap-Caps for almost every caliber that I have guns to match. And I use some caliber of 'em at least three times per week.
Thing is, it's not just dry-fire, it's dry-practice. If you want realistic practice doing reloads, you probably want cartridges in the magazines. Trying to quickly seat an empty magazine isn't the same as seating one with a round in it. If you want to practice moving to cover and doing an emergency (slide-lock) reload, you probably want to have a cartridge in that new magazine so you can realistically practice releasing the slide and having it strip a cartridge from the mag. If you want to dry-practice stoppage reduction, you need Snap-Caps; that's about the only way you can safely setup a double-feed situation in the comfort of your own living room. For a pump shotgun, they're fantastic because you can simulate not only the administrative functions of clearing the chamber and voiding the tube, but you can realistically practice shell ejection and chambering, and on-the-fly ammo exchange (i.e., ejecting a shell and sliding in a slug from the carrier). And using Snap-Caps is one extra step to make sure safety come first: if you not only empty your firearm and triple-check it, but then charge the mags and load it with inert ammo, you get one extra step assuring there is no live ammo in or near the gun.
At just a few bucks per package of three to five Snap-Caps, I think they're an essential part of a gunman's equipment.

Thing is, it's not just dry-fire, it's dry-practice. If you want realistic practice doing reloads, you probably want cartridges in the magazines. Trying to quickly seat an empty magazine isn't the same as seating one with a round in it. If you want to practice moving to cover and doing an emergency (slide-lock) reload, you probably want to have a cartridge in that new magazine so you can realistically practice releasing the slide and having it strip a cartridge from the mag. If you want to dry-practice stoppage reduction, you need Snap-Caps; that's about the only way you can safely setup a double-feed situation in the comfort of your own living room. For a pump shotgun, they're fantastic because you can simulate not only the administrative functions of clearing the chamber and voiding the tube, but you can realistically practice shell ejection and chambering, and on-the-fly ammo exchange (i.e., ejecting a shell and sliding in a slug from the carrier). And using Snap-Caps is one extra step to make sure safety come first: if you not only empty your firearm and triple-check it, but then charge the mags and load it with inert ammo, you get one extra step assuring there is no live ammo in or near the gun.
At just a few bucks per package of three to five Snap-Caps, I think they're an essential part of a gunman's equipment.
Join the NRA or upgrade your membership today. Support the Texas Firearms Coalition and subscribe to the Podcast.
I’ve contacted my State Rep, Gary Elkins, about co-sponsoring HB560. Have you contacted your Rep?
NRA Benefactor Life Member
I’ve contacted my State Rep, Gary Elkins, about co-sponsoring HB560. Have you contacted your Rep?
NRA Benefactor Life Member
-
- Member
- Posts: 102
- Joined: Mon Aug 13, 2007 6:27 pm