i just got a laserlyte rl-xd for my xdm
can anyone recommend a place that can put this on for me?
im from houston
ive contacted one person but they said their sight tool is not big enough
about how much does it cost to get it installed and about how long will it take?
where to get sights installed on gun?
Moderator: carlson1
where to get sights installed on gun?
Last edited by roff on Sun Nov 07, 2010 3:56 pm, edited 1 time in total.
i has chl
i has cfp
i has cfp
Re: where to get sights installed on gun?
A friend of mine had the same site installed at Euless gun. I think he said they charge right at a $100 and sighted the laser also.
If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun. – The Dalai Lama
Re: where to get sights installed on gun?
If you don't have a sight removal tool you may not be able to change out to the new sight. Mine would not move in the dovetail with just a hammer and punch. Bought a sight remover and it still took 2 hours of tap and turn on the sight tool to get the original sight out. Installing the laserlyte rl was a piece of cake after that.
I chose to align the laser along the edge of the slide and impact point at 15 yds, this resulted in the impact point of the bullet being slightly left of the laser. This alignment will be good for windage at any distance and elevation is all you have to adjust for in aiming. Works for me and I really like it on the XD-40SC. Put a drop of nail polish on the battery cap threads to keep it from backing out.
I chose to align the laser along the edge of the slide and impact point at 15 yds, this resulted in the impact point of the bullet being slightly left of the laser. This alignment will be good for windage at any distance and elevation is all you have to adjust for in aiming. Works for me and I really like it on the XD-40SC. Put a drop of nail polish on the battery cap threads to keep it from backing out.