Conversions

[gguess66]

I am looking at purchasing a Glock 23, I was wondering if you could convert it into a .357 with a 32 barrel or do I need more, also can I convert a sig p226 from a 9 to anything else?

Thanks
GG

[Pawpaw]

I don't know anything about Glocks, but you can convert that P226 to .22lr.

http://store.sigsauer.com/p226-22lr-conversion-kit.html

[EEllis]

That is all you need but you'll want to make sure you have the latter generation glock with the 3 pins on the grip (3 gen I think) to avoid issues. Lone Wolf makes a drop in for about $100 and it should work great.

[EEllis]

Oh on the Sig you can only go down not up. If you have a 9mm gun then you can't go to 40 but if you have a 40 you can go to 357 or 9mm.

[gguess66]

That is all you need but you'll want to make sure you have the latter generation glock with the 3 pins on the grip (3 gen I think) to avoid issues. Lone Wolf makes a drop in for about $100 and it should work great.

Will the gen 4 be good?

[EEllis]

That is all you need but you'll want to make sure you have the latter generation glock with the 3 pins on the grip (3 gen I think) to avoid issues. Lone Wolf makes a drop in for about $100 and it should work great.

Will the gen 4 be good?

Yep. Now if you get the 9mm barrel you would need a new spring but the spring for the 40 and the 357 are the same.